Model 235

Liên hệ

Giá 1.000₫

Model 235 Disconnects included (4 lg.) Boot Kit available Available with stainless steel   ball bearing (235-SS)   Model No. Terminals Voltage AC/DC Amp Rating @500VAC Max. Freq. MHz Contact Resistance Max. RPM Temp Max. F (C) /  Min. F (C) Rotation Torque (gm-cm) Circuit Separation   235 2 0-500 30 100 <1m 1200 140 (60) /-20(-29) 400 >50M 235-SS 2 0-500 30 100 <1m 1200 140 (60) /-20(-29) 400 >50M "SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)   Model 235 Accessories 57235 Boot Kit for dust or splash protection IP51 55250 Terminal 16 - 14 AWG (qty. 2 included) 55251 Terminal 16 - 14 AWG (qty. 2 included)   Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)   Model 235 Standard Wire Connections Model 235 Wire Connections With Optional Boot   Model 235 Suggested Mounting Methods Model 235 is typically mounted by either the black body or the white plastic bushing on either end...

Model 235

Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
  ball bearing (235-SS)

 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@500VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
 
235 2 0-500 30 100

<1m

1200 140 (60) /-20(-29) 400

>50M

235-SS 2 0-500 30 100

<1m

1200 140 (60) /-20(-29) 400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
 

Model 235 Accessories
57235
Boot Kit for dust or splash
protection IP51
55250
Terminal 16 - 14 AWG
(qty. 2 included)
55251
Terminal 16 - 14 AWG
(qty. 2 included)
 
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
 
Model 235 Standard Wire Connections

Model 235 Wire Connections With Optional Boot
  Model 235 Suggested Mounting Methods
Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
235, et al 1.248"    (31.7) .80"    (20.3)
     

Typical Bushing Mount Hole Dimensions

235, et al .748"    (19.0) .80"    (20.3)
*Inch  (mm) Tolerance Ø   +.001" (+.025)    
    -.000" (-.000)    











Installation Notes:

  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Test

Sản phẩm mới nhất