Mercotac - Model 230

Còn hàng

Giá 4.200.000₫

Model 230 Thiết bị khớp nối xoay dẫn điện Mercotac được ứng dụng rất nhiều trong các máy móc được cấp điện, mà có sự chuyển động quay. Với sự bố trí cơ khí rất tinh vi, sử dụng thủy ngân dẫn điện để mang lại sự tiện lợi, ổn định cho máy móc hoạt động. Được ứng dụng nhiều trong các máy đóng gói, máy thực phẩm, vi sinh, bánh kẹo... High-speed model available (205-H) Low-torque/low-temp. models available (205-L) Available with stainless steel ball bearing (205-SS)   Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and...

Model 230

Thiết bị khớp nối xoay dẫn điện Mercotac được ứng dụng rất nhiều trong các máy móc được cấp điện, mà có sự chuyển động quay. Với sự bố trí cơ khí rất tinh vi, sử dụng thủy ngân dẫn điện để mang lại sự tiện lợi, ổn định cho máy móc hoạt động. Được ứng dụng nhiều trong các máy đóng gói, máy thực phẩm, vi sinh, bánh kẹo...


High-speed model available (205-H)
Low-torque/low-temp. models available (205-L)
Available with stainless steel ball bearing (205-SS)
 
Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque and low cost.
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
205 2 0-250 4 200

<1m

2000 140 (60) /45(7) 75

>25M

205-SS 2 0-250 4 200

<1m

2000 140 (60) /45(7) 75

>25M

205-L 2 0-250 4 200

<1m

1200 140 (60) /-20(-29) 20

>25M

205-LS 2 0-250 4 200

<1m

1200 140 (60) /-20(-29) 75

>25M

205-H 2 0-250 4 200

<1m

3600 140 (60) /45(7) 35

>25M

205-HS 2 0-250 4 200
 

<1m

3600 140 (60) /45(7) 35

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball bearing
"H" designator indicates high RPM
"HS" designator indicates high RPM & stainless steel ball bearing

 

Model 205 Accessories
592
two contact receptacle 
w/ 6" wires
(18 AWG)
591
two contact receptacle
w/ one 6" wire
(18 AWG)
594
two contact receptacle 
w/ two solder holes
for 18 AWG wires
595
two contact cap
w/ two solder lugs
 

Receptacle used for mounting to rotating device.
Accessories are required for wire connections.  Order Separately.

 
Model 205 Connections

Model 205 Suggested Mounting Methods
Model 205 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Receptacle Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
591, 592, 594 .283"    (7.19) .35"    (8.89)
*Inch (mm) Tolerance Ø    +.001" (+.025)    
     -.000" (-.000)    











Installation Notes:

  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Test

Sản phẩm mới nhất