Model 215-2K

Liên hệ

Giá 1.000₫

Model 215-2K Disconnects included (4 lg.) Boot Kit available Available with stainless steel   ball bearing (215-2KSS)   Model No. Terminals Voltage AC/DC Amp Rating @2000VAC Max. Freq. MHz Contact Resistance Max. RPM Temp Max. F (C) /  Min. F (C) Rotation Torque (gm-cm) Circuit Separation   215-2K 2 0-2,000 15 100 <1m 1200 140 (60) /-20(-29) 400 >50M 215-2KSS 2 0-2,000 15 100 <1m 1200 140 (60) /-20(-29) 400 >50M "SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)   Model 215-2K Accessories 57235 Boot Kit for dust or splash protection IP51 552KA Terminal 22 - 18 AWG (qty. 4 included) 55253 Shrink Tube (qty. 4 included)   Terminals for 16-14 AWG wires available (p/n 552KB).   Model 215-2K Standard Wire Connections Model 215-2K Wire Connections With Optional Boot   Model 215-2K Suggested Mounting Methods Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When...

Model 215-2K

Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
  ball bearing (215-2KSS)

 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@2000VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
 
215-2K 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

215-2KSS 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
 

Model 215-2K Accessories
57235
Boot Kit for dust or splash
protection IP51
552KA
Terminal 22 - 18 AWG
(qty. 4 included)
55253
Shrink Tube
(qty. 4 included)
 
Terminals for 16-14 AWG wires available (p/n 552KB).
 
Model 215-2K Standard Wire Connections

Model 215-2K Wire Connections With Optional Boot
  Model 215-2K Suggested Mounting Methods
Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
215-2K, et al 1.248"    (31.7) .80"    (20.3)
     

Typical Bushing Mount Hole Dimensions

215-2K, et al .748"    (19.0) .80"    (20.3)
*Inch  (mm) Tolerance Ø   +.001" (+.025)    
    -.000" (-.000)    











Installation Notes:

  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Test

Sản phẩm mới nhất