Mercotac - Model 430 – Công ty CPTM và Kỹ thuật điện

Model 430

Thiết bị khớp nối xoay dẫn điện Mercotac được ứng dụng rất nhiều trong các máy móc được cấp điện, mà có sự chuyển động quay. Với sự bố trí cơ khí rất tinh vi, sử dụng thủy ngân dẫn điện để mang lại sự tiện lợi, ổn định cho máy móc hoạt động. Được ứng dụng nhiều trong các máy đóng gói, máy thực phẩm, vi sinh, bánh kẹo...

Model 430 Accessor

50431
Plug Assembly 12 in. wires
14 AWG & 18 AWG
Suitable for up to 20 Amps

50430
Plug Kit - No wires, terminals for wire gauges
20 - 16 AWG & 16 - 14 AWG
Suitable for up to 20 Amps
Also order 5030-T

57430
Boot Kit for dust or splash protection
IP51

55251
Terminal 16 - 14 AWG
(qty. 2 included)

5030-T
Plug Terminal Crimping Tool
For Use With 50430 Kit

55250
16 - 14 AWG (qty. 2 included)

Model 430 Four Conductors, 2@4amps, 2@30amps
Disconnects included (4 sm., 4 lg.) Boot kit available Available with stainless steel ball bearing (430-SS)

Mercotac model 430 is ideal for heated roller applications, where connecting to senstive thermocouple signals and simultaneously powering the heater are required.


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

430

0-250

2@4/2@30

100

<1m

1200

140 (60) /-20(-29)

400

>25M

430-SS

0-250

2@4/2@30

100

<1m

1200

140 (60) /-20(-29)

400

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 430 Accessories


50431 Plug Assembly 12 in. wires 14 AWG & 18 AWG Suitable for up to 20 Amps	50430 Plug Kit - No wires, terminals for wire gauges 20 - 16 AWG & 16 - 14 AWG Suitable for up to 20 Amps Also order 5030-T

57430 Boot Kit for dust or splash protection IP51	55251 Terminal 16 - 14 AWG (qty. 2 included)

5030-T Plug Terminal Crimping Tool For Use With 50430 Kit	55250 16 - 14 AWG (qty. 2 included)

	55110 22 - 18 AWG (qty. 4 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 430 Standard Wire Connections

Model 430 Wire Connections With Optional Boot

Model 430 Suggested Mounting Methods

Model 430 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
430, et al		1.248" (31.70)	.80" (20)

Typical Bushing Mount Hole Dimensions
430, et al		.625" (15.88)	.40" (10)
With Plug Connector		.625" (15.88)	1.40" (36)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit