Giỏ hàng: 
Model 331
Liên hệ
Giá 1.000₫
Model 331
Disconnects included
(4 sm., 2 lg.)
Boot kit available
Available with stainless steel ball bearing (331-SS)
Model No.
Terminals
Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
331
3
0-250
2@4/1@30
100
<1m
1800
140 (60) /-20(-29)
200
>25M
331-SS
3
0-250
2@4/1@30
100
<1m
1800
140 (60) /-20(-29)
200
>25M
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 331 Accessories
55251
Terminal 16 - 14 AWG
(qty. 1 included)
57230
Boot Kit for dust / splash protection
IP51
55250
16 - 14 AWG (qty. 1 included)
55110
22 - 18 AWG (qty. 4 included)
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
Model 331 Standard Wire Connections
Model 331 Wire Connections With Optional Boot Kit
Model 331 Suggested Mounting Methods
Model 331 is typically mounted by either the black body...
Model 331
Disconnects included
(4 sm., 2 lg.)
Boot kit available
Available with stainless steel ball bearing (331-SS)
| Model No. | Terminals | Voltage AC/DC |
Amp Rating @240VAC |
Max. Freq. MHz |
Contact Resistance |
Max. RPM |
Temp Max. F (C) / Min. F (C) |
Rotation Torque (gm-cm) |
Circuit Separation |
| 331 | 3 | 0-250 | 2@4/1@30 | 100 |
|
1800 | 140 (60) /-20(-29) | 200 |
|
||||
| 331-SS | 3 | 0-250 | 2@4/1@30 | 100 |
|
1800 | 140 (60) /-20(-29) | 200 |
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
 Model 331 Accessories |
 |
 |
| 55251 Terminal 16 - 14 AWG (qty. 1 included) |
57230 Boot Kit for dust / splash protection IP51 |
 |
 |
| 55250 16 - 14 AWG (qty. 1 included) |
55110 22 - 18 AWG (qty. 4 included) |
|
Terminals for other wire gauges available. |
| Model 331 Standard Wire Connections |
|
|
| Model 331 Wire Connections With Optional Boot Kit |
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
| Model 331 Suggested Mounting Methods |
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
Test
