Giỏ hàng: 
Model 250
Còn hàng
Giá 1.000₫
Model 250
High-speed model available (205-H)
Low-torque/low-temp. models available (205-L)
Available with stainless steel ball bearing (205-SS)
Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque and low cost.
Model No.
Terminals
Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
205
2
0-250
4
200
<1m
2000
140 (60) /45(7)
75
>25M
205-SS
2
0-250
4
200
<1m
2000
140 (60) /45(7)
75
>25M
205-L
2
0-250
4
200
<1m
1200
140 (60) /-20(-29)
20
>25M
205-LS
2
0-250
4
200
<1m
1200
140 (60) /-20(-29)
75
>25M
205-H
2
0-250
4
200
<1m
3600
140 (60) /45(7)
35
>25M
205-HS
2
0-250
4
200
<1m
3600
140 (60) /45(7)
35
>25M
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball bearing
"H" designator indicates high RPM
"HS" designator...
Model 250
|
|
|
|
High-speed model available (205-H) Low-torque/low-temp. models available (205-L) Available with stainless steel ball bearing (205-SS) |
|
|
| Model No. | Terminals | Voltage AC/DC |
Amp Rating @240VAC |
Max. Freq. MHz |
Contact Resistance |
Max. RPM |
Temp Max. F (C) / Min. F (C) |
Rotation Torque (gm-cm) |
Circuit Separation |
| 205 | 2 | 0-250 | 4 | 200 |
|
2000 | 140 (60) /45(7) | 75 |
|
||||
| 205-SS | 2 | 0-250 | 4 | 200 |
|
2000 | 140 (60) /45(7) | 75 |
|
||||
| 205-L | 2 | 0-250 | 4 | 200 |
|
1200 | 140 (60) /-20(-29) | 20 |
|
||||
| 205-LS | 2 | 0-250 | 4 | 200 |
|
1200 | 140 (60) /-20(-29) | 75 |
|
||||
| 205-H | 2 | 0-250 | 4 | 200 |
|
3600 | 140 (60) /45(7) | 35 |
|
||||
| 205-HS | 2 | 0-250 | 4 | 200 |
|
3600 | 140 (60) /45(7) | 35 |
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball bearing
"H" designator indicates high RPM
"HS" designator indicates high RPM & stainless steel ball bearing
 Model 205 Accessories |
 |
 |
 |
 |
| 592 two contact receptacle w/ 6" wires (18 AWG) |
591 two contact receptacle w/ one 6" wire (18 AWG) |
594 two contact receptacle w/ two solder holes for 18 AWG wires |
595 two contact cap w/ two solder lugs |
|
Receptacle used for mounting to rotating device.
|
|||
| Model 205 Connections |
|
|
|
| Model 205 Suggested Mounting Methods |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
|
||||||||||||||||||||
  |
 |
 |
 |
 |
 |
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
Test
